Focus on Segmentation, NAT, and Perimeter Zoning

Introduction

In today’s hybrid cloud environments, securing application perimeters and internal workloads requires modern, software-defined networking strategies. Azure Local SDN, previously known as Azure Stack HCI SDN, provides the tools to build secure DMZ architectures on-premises. This article presents a detailed design framework for implementing segmented, NAT-enabled DMZ zones using Gateway Pools and policy-based perimeter control.

Executive Summary

With Azure Local SDN and Gateway Pools, architects can create logical zoning and enforce segmentation through defined traffic flows. This model supports:

• Stateful NAT with SNAT and DNAT flexibility
• Separation between internet-facing and internal workloads
• Centralized ingress and egress control points
• Micro-segmented workloads in isolated VNets

Common use cases include partner access, reverse proxy workloads, and hybrid services exposed to the internet.

Reference Architecture

Key Components and Concepts

Network Segmentation and ACLs

Define Segmented VNets

Set up dedicated VNets for each security tier:

• DMZ-Tier for public services
• App-Tier for internal APIs and microservices
• Data-Tier for secure backend databases

Apply ACLs Using PowerShell

Create fine-grained control using SDN access control lists. The example below allows HTTPS traffic into the DMZ.

$rule = @{
    Name = "AllowInboundWeb"
    Action = "Permit"
    Protocol = "TCP"
    RemotePortRange = "443"
}
New-NetworkControllerAccessControlList -Name "Inbound-DMZ" -RuleList @($rule) -AccessControlListType "Ingress"

Block all traffic by default and allow only explicitly defined flows. Apply ACLs at the VNet or subnet boundary.

Gateway Pools and NAT Configuration

Define Gateway Pools

Create a Gateway Pool in Windows Admin Center or by using PowerShell. These pools handle public IP routing, NAT, and load balancing.

Assign NAT Rules

Use DNAT for inbound access and SNAT for outbound traffic masking. Below is an example using PowerShell:

Add-NetworkControllerLoadBalancerNatRule -Name "ReverseProxy" `
  -FrontendPort 443 `
  -BackendPort 8443 `
  -Protocol TCP `
  -FrontendIpConfigurationId $gatewayVip `
  -BackendAddressPoolId $proxyPool

This rule maps external traffic on port 443 to an internal application running on port 8443.

Best Practices for Zoning and Security

Sample Bicep Definitions

DMZ VNet

resource dmzVnet 'Microsoft.Network/virtualNetworks@2022-07-01' = {
  name: 'DMZ-VNet'
  location: location
  properties: {
    addressSpace: {
      addressPrefixes: ['10.10.0.0/24']
    }
    subnets: [
      {
        name: 'dmz-subnet'
        properties: {
          addressPrefix: '10.10.0.0/25'
          networkSecurityGroup: {
            id: dmzNsg.id
          }
        }
      }
    ]
  }
}

Gateway Pool

resource gatewayPool 'Microsoft.Network/gatewayPools@2023-05-01' = {
  name: 'DMZ-GatewayPool'
  location: location
  properties: {
    frontendIPConfigs: [
      {
        name: 'dmz-gw-ip'
        properties: {
          publicIPAddress: {
            id: publicIp.id
          }
        }
      }
    ]
    backendPools: [
      {
        name: 'dmz-backend'
        properties: {
          backendIPConfigurations: []
        }
      }
    ]
  }
}

Conclusion

By using Azure Local SDN and Gateway Pools, architects can design secure DMZ architectures that support hybrid application exposure without compromising internal security. With NAT, NSG, ACL, and routing policies in place, you can enforce strict perimeter control and limit lateral movement between security zones.

This design approach aligns with modern zero trust strategies and enables highly scalable hybrid deployments across edge, branch, and data center environments.

The post Designing a Secure DMZ Using Azure Local SDN and Gateway Pools first appeared on Digital Thought Disruption.

The post Designing a Secure DMZ Using Azure Local SDN and Gateway Pools appeared first on Digital Thought Disruption.